| Materials: |
Flange and Support Arm 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 16-gauge (1.6mm) stainless steel
mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew
Concealed Wall Plate 18-8 S, type-304, 16-gauge (1.6mm) stainless steel
Hook18-8 S, type-304, 12-gauge (2.8mm) stainless steel. Welded to the support arm |
| Installation: |
To remove concealed wall plate from the back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at the top; secure with two sheet-metal screws, furnished by the manufacturer, at points indicated by an S. Engage mounting bracket onto prongs of a wall plate, then secure into position by tightening setscrew at bottom of the flange
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured
For plaster or drywall construction, provide concealed backing to comply with local building codes, then secure the unit with sheet-metal screws furnished
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts |
