Satin-finish stainless steel double robe hook
Features
- Satin-finish stainless steel
- Contoured 4" (100mm) wide bar forms hook at each end
Specifications
| Materials: | Flange and Support Arm - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew
Concealed Wall Plate - 18-8 S, type-304, 16-gauge (1.6mm) stainless steel
Cap - 18-8 S, type-304, 10-gauge (3.6mm) stainless steel. Welded to the support arm |
| Size: | 4" (105mm) l x 2" (50mm) h x 2-5/16" (60 mm) d |
| Installation: | To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket onto prongs of wall plate, then secure into position by tightening setscrew at bottom of flange
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts |
Certifications
| Barrier-Free Code Compliance: | Comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.) |
