Bobrick B4288 Contura Series Surface-Mounted Multi-Roll Toilet Tissue Dispenser


Sale price$203.02/ea

Related Hardware

Bobrick contouraSeries ® stainless steel surface-mounted multi-roll toilet tissue dispenser with satin finish


  • Satin-finish stainless steel with stainless steel dispensing mechanism
  • Flush tumbler lock
  • Extra roll automatically drops in place when bottom roll is depleted
  • Theft-resistant, heavy-duty spindles


Materials: Cabinet - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Radius on top corners of cabinet match corners and edges of door
Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with 18-gauge (1.2mm) stainless steel door frame. Exposed surfaces have satin finish. Front of door is drawn, one-piece, seamless construction and has same degree of arc as other Bobrick contouraSeries washroom accessories. Radius on corners and edges of door match top corners of cabinet and other contouraSeries accessories. Secured to cabinet with two rivets. Equipped with a flush tumbler lock keyed like other Bobrick washroom accessories
Dispensing Mechanism, Inner Housing and Cam - 18-8 S, type-304, 18-gauge (1.2mm) stainless steel
Spindles - Heavy-duty, one-piece, molded ABS. Theft-resistant. Retained in dispensing mechanism when door is locked
Size: 6-1/16" (155mm) w x 11" (280mm) h x 5-15/16" (150mm) d
Capacity: Two standard-core toilet tissue rolls up to 5-1/4" (133mm) diameter (1800 sheets)
Operation: Tissue rolls are loaded and locked into dispensing mechanism. Extra roll automatically drops in place when bottom roll is depleted. Depleted rolls can only be removed after unlocking door
Installation: For partitions with particleboard or other solid core, secure with four #10 x 5/8" (4.8 x 16mm) sheet-metal screws (not furnished) at points indicated by an S, or provide through-bolts, nuts, and washers
For hollow-core metal partitions, provide solid backing into which the sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 3/16" (5mm) toggle bolts or expansion bolts


Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)

Recently viewed

Alternate Products