Bobrick B4112 Contura Series Surface-Mounted Soap Dispenser


Sale price$142.34/ea

Related Hardware

Stainless steel liquid soap dispenser


  • Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps
  • Container is satin-finish stainless steel
  • Soap refill window
  • Concealed wall fastening; hinged filler-top requires special key to open
  • Vandal-resistant
  • Valve operates with less than 5 lb of force (22.2 N)


Materials: Container - Body is 18-8 S, type-304, 20-gauge (1.0mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Front has same degree of arc as other Bobrick contouraSeries washroom accessories. Radius on corners and edges complement other contouraSeries accessories. Back plate is 22-gauge (0.8mm) stainless steel with 20-gauge (1.0mm) stainless steel mounting bracket attached. Container body and back plate are epoxy-sealed to prevent warping and leakage. Concealed wall plate is 20-gauge (1.0mm) stainless steel. Equipped with a plastic soap refill-indicator window and a locked, hinged stainless steel lid for top filling
Valve - Black molded plastic push button. Soap head-holding mushroom valve. Stainless steel spring. U-packing seal and duckbill. Antibacterial-soap-resistant plastic cylinder
Operation: Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. To prevent corrosion, use only chloride free pH-natural liquid soaps. Valve operates with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Window indicates when refill is required. The locked, hinged lid opens for top filling with special key provided. Concealed, vandal resistant mounting
Installation: Secure wall plate to the wall with screws furnished at points indicated by an S. Slide mounting bracket of container down onto wall plate and secure unit with furnished locking-screw. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts
Note: Surface-mount the dispenser plumb and true with valve 6" (152mm) to right or left of lavatory center. Provide 4" (102mm) minimum clearance from the lid to the underside of any horizontal projection. Push buttons should be located 44" (1120mm) maximum above the finish floor
Capacity: 40-fl oz (1.2-L)
Size: 7" (180 mm) w x 6-1/8" (155 mm) h x 3-5/16" (85 mm) d


Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)

Recently viewed

Alternate Products