Bobrick B354 Classic Series Partition-Mounted Sanitary Napkin Disposal


Sale price$304.72/ea
In Stock
3-4 Week Lead Time

Related Hardware

This unit comes with a leak-proof, rigid molded polyethylene waste receptacle that has room over 1.2 gallons or 4.6 liters of waste. It comes with a cabinet that is made with type-304 stainless steel with satin finish


  • Satin-finish stainless steel
  • Mounts in partitions 1/2"-1-1/4" (13-32mm) thick
  • Removable, leak-proof 1.2-gal (4.6-L) plastic receptacle
  • Can be equipped with international graphic symbol identifying usage


Materials: Cabinet - 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish
Flanges - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless construction
Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories
Disposal Panels - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edge hemmed for safety. Secured to door and permanent panel with spring-loaded, full-length stainless steel piano-hinges. Equipped with an international graphic symbol identifying sanitary napkin disposal
Waste Receptacle - Leak-proof, rigid molded polyethylene. Removable for servicing
Operation: Unit is equipped with a self-closing panel covering each disposal opening. Napkin disposal is emptied by opening door with furnished key and removing waste receptacle. Disposable paper liners for the receptacle are available as an optional accessory: order Bobrick Part No. 353-12
Size: 12-3/4" (325mm) w x 17-3/16" (435mm) h x 4-1/16" (105mm) d
Capacity: 1.2-gal. (4.6-L)
Installation: Mounts in toilet partition 1/2" to 1-1/4" (13 x 32mm) thick, centered through a cutout specially ordered from partition manufacturer or field cut. Dimensions of cutout are to be 11" wide x 15-1/2" high (280 x 395mm). For factory-made cutouts, location and size details should be furnished to partition manufacturer. For hollow-core metal partitions, solid framing into which mounting sheet-metal screws can be secured is required
For installation with sheet-metal screws furnished, place unit firmly in partition opening, making sure the entire perimeter of fixed flange is tight against partition surface, then secure to partition with sheet-metal screws furnished, through four holes in fixed flange at points indicated by an S. On other side of partition, position adjustable flange so the mounting screw holes are not inline with mounting screw holes in fixed flange. Make sure the entire perimeter of adjustable flange is tight against partition surface, then secure with sheet-metal screws furnished
For through-bolting method of installation, make sure that mounting holes in adjustable flange are inline with holes in fixed flange. Using adjustable flange as template for locating centers, drill 7/32" or 1/4" (5.5 or 6.4mm) holes through partition. Provide four binder post and #6 (3.5mm) flat-head sheet-metal screws to secure unit and its adjustable flange. Obtain binder posts and sheet-metal screws by ordering Bobrick Binder Post Kit No. 354-119 for partitions 1/2" (13mm) thick or Kit No. 354-124 for partitions 3/4" to 1-1/4" (19 to 32mm) thick


Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)

Recently viewed

Alternate Products