Bobrick B254 Classic Series Surface-Mounted Sanitary Napkin Disposal


Sale price$201.37/ea
In Stock
3-4 Week Lead Time

Related Hardware

This unit comes with a leak-proof, rigid molded polyethylene waste receptacle that has room over 1.2 gallons or 4.6 liters of waste. It comes with a cabinet that is made with type-304 have-gauge stainless steel


  • Satin-finish stainless steel
  • Self-closing panel covers disposal opening
  • Removable, leak-proof 1.2-gal (4.6-L) plastic receptacle
  • Can be equipped with international graphic symbol identifying usage


Materials: Cabinet - 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish
Door - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories
Disposal Panel - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edge hemmed for safety. Secured to door with a spring-loaded, full-length stainless steel piano-hinge. Equipped with an international graphic symbol identifying sanitary napkin disposal
Waste Receptacle - Leak-proof, rigid molded polyethylene. Removable for servicing
Operation: Unit is equipped with a self-closing panel covering disposal opening. Napkin disposal is emptied by opening door with furnished key and removing waste receptacle. Disposable paper liners for the receptacle are available as an optional accessory: order Bobrick Part No. 353-12
Size: 10-11/16" (270mm) w x 15-1/8" (385mm) h x 4-1/16" (105mm) d
Capacity: 1.2-gal. (4.6-L)
Installation: For partitions with particle-board or other solid core, secure with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed back-toback, then provide threaded sleeves and machine screws for the full thickness of partition. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws, or provide 3/16" (5mm) toggle bolts or expansion bolts


Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)

Recently viewed

Alternate Products