Bobrick B-2111
Bobrick B-2111

Bobrick B2111 Classic Series Vertical Surface-Mounted Soap Dispenser

BOBRICKSKU: B2111
Price:
$79.86/ea
In Stock
3-4 Week Lead Time

Related Hardware

Bobrick B2111 Classic Series Vertical Surface-Mounted Soap Dispenser

The Bobrick B2111 Classic Series surface-mounted soap dispenser has a corrosion-resistant valve. It dispenses commercial all-purpose hand soaps. The vertical tank of the B2111 is satin-finish stainless steel and has an easy-to-view refill window.

Features: Bobrick B2111 Surface-Mounted Soap Dispenser

  • Soap refill window
  • Concealed wall fastening; hinged filler-top requires special key to open
  • Vandal-resistant
  • Valve operates with less than 5 lb of force (22.2 N)

Bobrick B2111 Surface-Mounted Soap Dispenser image

Bobrick B2111 Surface-Mounted Soap Dispenser Image

Materials:
  • Container - 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin-finish
  • Body is drawn, one-piece, seamless construction
  • Back plate has mounting bracket attached
  • Furnished with concealed wall plate
  • Equipped with a clear acrylic refill-indicator window and a locked, hinged stainless steel lid for top filling
  • Valve - Black molded plastic push button and spout
  • Soap head-holding mushroom valve
  • Stainless steel spring
  • U-packing seal and duckbill
  • Antibacterial-soap-resistant plastic cylinder
Operation:
  • Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps
  • To prevent corrosion of the tank, use only chloride-free pH-neutral liquid soaps
  • Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)
  • Window indicates when refill is required
  • The locked, hinged lid opens for top filling only with special key provided
  • Concealed, vandal-resistant mounting
Size:
  • 4-3/4" (120mm) w x 8-1/8" (205mm) h x 3-1/2" (90mm) d
Capacity:
  • 40-fl oz (1.2-L)
Installation:
  • Secure wall plate to the wall with three sheet-metal screws, furnished by manufacturer, at points indicated by an S.
  • Slide mounting bracket of container down onto wall plate and secure unit with furnished locking-screw.
  • For plaster or dry wall construction, provide concealed backing to comply with local building codes and secure with sheet-metal screws furnished.
  • For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts
  • Note: Provide Surface-mount the dispenser plumb and true with valve 6" (150mm) to right or left of lavatory center. Provide 4" (100mm) minimum clearance from the lid to the underside of any horizontal projection. Push buttons should be located 44" (1120mm) maximum above the finish floor
Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)


Product Cut Sheet

Recently viewed

Alternate Products